Garage Before Modification

This scale drawing shows the garage before any modifications were made. It is a single skin brick building with a floor area measuring 5,190mm x 2,555mm (17' x 8' 5"). Entrance was by wooden double doors at the front and, at the back, a wooden door with two single glazed panels. Integral with the door frame was a wide wooden window with six single-glazed glass panels. The garage is gabled with a pitched roof the tiles supported by wooden panels and rafters as well as five wooden collar ties.

In the drawing, for clarity, the rafters (except those associated with joists/ties), have been omitted as have the roof tiles. Navigation is by a series of buttons always located at the top right of the drawing. Click HERE to view the navigation menu. Or CLICK HERE to return to the Home page.

HOW TO USE THE NAVIGATION BUTTONS (in the drawing, above)

The NAVIGATION BUTTONS are always positioned on the top right hand side of the drawing. Click once on a button to activate it. The function of each button is described below. When you have finished viewing, CLICK HERE to return to the main page.

 

GENERAL
With the mouse pointer positioned anywhere on the drawing, rotate your mouse wheel (if present) towards you to zoom out, or in the opposite direction to zoom in.

Hover/orbit Left click the HOVER/ORBIT button once, then hold down left mouse button and move the mouse over the drawing to orbit round it. Back to top of page.
Zoom in/out Left click the ZOOM IN/ZOOM OUT button once, then hold down left mouse button and move the mouse over drawing towards the top to zoom in, & towards the bottom to zoom out. Back to top of page.
Pan left, right, up & down Left click the PAN button once, then hold down left mouse button and move the mouse over drawing in desired direction to pan up, down, left or right. Back to top of page.
Rotate Left click the ROTATE button once, then hold down left mouse button and move the mouse over drawing in desired direction to rotate the model. Back to top of page.
Zoom in Left click the ZOOM IN button once, then hold down left mouse button and move the mouse over drawing to create a black rectangle over the area you wish to view in close up. On release of the mouse button, the zoom in function will immediately occur. Back to top of page.
Immediately Zoom out. Left click the ZOOM OUT button once, which will immediately zoom out of the drawing. Back to top of page.
Display the drawing full screen. Left click the FULL SCREEN button once, which will immediately display the drawing full screen. Click the FULL SCREEN button or press the Esc key on the computer keyboard to return to reduced screen mode. Back to top of page.
Display the drawing's default view. This icon will appear when the mouse is positioned at the bottom centre of the drawing. Left click the icon once, which will immediately display the default view of the drawing. Back to top of page.

When you have finished viewing, CLICK HERE to return to the main page.