Garage Phase 6, Stud Wall Construction.

This is a scale 3D drawing of the final construction phase of the project with Orientated Strand Board walls screwed to the stud wall & partition frameworks. The original back door is shown in its re-located position, giving access to the workshop area from the vestibule. The ceiling, floor boards & relocated collar ties are also shown together with the new fluorescent strip lighting. Representation of the end window has been omitted for clarity. Click HERE to view the navigation menu. Or CLICK HERE to return to the Home page.

HOW TO USE THE NAVIGATION BUTTONS (in the drawing, above)

The NAVIGATION BUTTONS are always positioned on the top right hand side of the drawing. Click once on a button to activate it. The function of each button is described below. When you have finished viewing, CLICK HERE to return to the Home page.

GENERAL
With the mouse pointer positioned anywhere on the drawing, rotate your mouse wheel (if present) towards you to zoom out, or in the opposite direction to zoom in.

	Left click the HOVER/ORBIT button once, then hold down left mouse button and move the mouse over the drawing to orbit round it. Back to top of page.
	Left click the ZOOM IN/ZOOM OUT button once, then hold down left mouse button and move the mouse over drawing towards the top to zoom in, & towards the bottom to zoom out. Back to top of page.
	Left click the PAN button once, then hold down left mouse button and move the mouse over drawing in desired direction to pan up, down, left or right. Back to top of page.
	Left click the ROTATE button once, then hold down left mouse button and move the mouse over drawing in desired direction to rotate the model. Back to top of page.
	Left click the ZOOM IN button once, then hold down left mouse button and move the mouse over drawing to create a black rectangle over the area you wish to view in close up. On release of the mouse button, the zoom in function will immediately occur. Back to top of page.
	Left click the ZOOM OUT button once, which will immediately zoom out of the drawing. Back to top of page.
	Left click the FULL SCREEN button once, which will immediately display the drawing full screen. Click the FULL SCREEN button or press the Esc key on the computer keyboard to return to reduced screen mode. Back to top of page.
	This icon will appear when the mouse is positioned at the bottom centre of the drawing. Left click the icon once, which will immediately display the default view of the drawing. Back to top of page.

When you have finished viewing, CLICK HERE to return to the Home page.